Features

• High efficiency: 91.5% @ 12.0Vin, 3.3V/16A out (SMD), 92.0% @ 12Vin, 3.3V/16A out (SIP)  
• Small size and low profile: SMD 1.30" x 0.53" x 0.38", SIP 2.00" x 0.53" x 0.37" 
• Standard footprint
• Voltage and resistor-based trim
• Pre-bias startup
• Output voltage tracking
• No minimum load required
• Output voltage programmable from 0.75Vdc to 5.0Vdc via external resistors
• Fixed frequency operation
• Input UVLO, Output OTP, OCP
• Remote ON/OFF
• Remote sense
• ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility
• UL/cUL 60950 (US & Canada) recognized, TUV (EN60950) certified, and CE mark

The Delphi series DNL10, single output, non-isolated point of load DC/DC converters are the latest offering from one of the world's largest power supply manufacturers - Delta Electronics, Inc. The DNL10 series provides a programmable output voltage from 0.75V to 5.0V using an external resistor. The DNL10 converters have flexible and programmable tracking and sequencing features to enable a variety of startup voltages as well as sequencing and tracking between power modules. This product family is available in a surface mount or SIP package and provides 16A of current in an industry standard footprint. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance and extremely high reliability under highly stressful operating conditions.